Reset your eKnitter

If your Wi-Fi network changes, you can update the Wi-Fi settings saved in your eKnitter.
There are three options to change or delete your Wi-Fi settings.

Option 1 — Change Wi-Fi in the WebApp (recommended)

Use this if your eKnitter is still reachable in your browser.

1. Open your eKnitter WebApp
2. Go to Settings / Config
3. Select Wi-Fi
4. Enter the new Wi-Fi name and password
5. Tap Save

Your eKnitter reconnects automatically.

Option 2 — Reset Wi-Fi settings using the eKnitter buttons

Use this if the WebApp can no longer be reached.

1. Turn on your eKnitter
2. Press and hold M
3. While holding M, press and hold the green button
4. While holding both, press and hold the yellow button
5. Keep holding all three until the display shows an X and the device restarts
6. Release all buttons

Your eKnitter is now ready for Wi-Fi setup again.

Option 3 — Reset Wi-Fi using the controller board (advanced)

Use this only if buttons and WebApp no longer respond.

1. Turn off your eKnitter
2. Open the case carefully
3. Locate the ESP boot/reset button on the controller board
4. Press and hold the button
5. While holding it, turn your eKnitter on
6. Release when the display shows Setup Mode

Your eKnitter is now ready to be connected to Wi-Fi again.